Grooved Fitting Reducing Cross
Grooved Fitting Reducing Cross
Grooved Fitting Reducing Cross
+
  • Grooved Fitting Reducing Cross
  • Grooved Fitting Reducing Cross
  • Grooved Fitting Reducing Cross

Grooved Fitting Reducing Cross

Applications: Industrial pipeline system on shipping ,mine, fire protection ,oil field,textile,powder plant,etc.

Category:

Product Introduction


  • 产品描述
  • Product Description

    Product Description

    1.Material: Ductile iron

    2.Size : DN25-DN200
     

    Tee, Cross, Reducer, Cap

    Size Pipe O.D mm/in Tee Cross Reducer
    grooved
    Reducer
    threaded
    Cap
    Standard Short Standard Short
    L L L L L L L
    DN
    in
    mm
    in
    mm
    in
    mm
    in
    mm
    in
    mm
    in
    mm
    in
    mm
    in
    mm
    in
    25
    1
    33.7
    1.327
    57
    2.244
    57
    2.244
    57
    2.244
    57
    2.244
    64
    2.52
    64
    2.52
    22
    0.866
    32
    1¼
    42.4
    1.669
    70
    2.75
    60
    2.36
    70
    2.75
    60
    2.36
    64
    2.52
    64
    2.52
    22
    0.866
    40
    1½
    48.3
    1.900
    70
    2.75
    60
    2.36
    70
    2.75
    60
    2.36
    64
    2.52
    64
    2.52
    22
    0.866
    50
    2
    60.3
    2.375
    83
    3.267
    70
    2.75
    83
    3.267
    70
    2.75
    64
    2.52
    64
    2.52
    22
    0.866
    65
    2½
    73.0
    2.875
    95
    3.74
    76
    2.99
    95
    3.74
    76
    2.99
    64
    2.52
    64
    2.52
    22
    0.866
    65
    3OD
    76.1
    3.000
    95
    3.74
    76
    2.99
    95
    3.74
    76
    2.99
    64
    2.52
    64
    2.52
    22
    0.866
    80
    3
    88.9
    3.500
    108
    4.25
    86
    3.385
    108
    4.25
    86
    3.385
    64
    2.52
    64
    2.52
    22
    0.866
    100
    4
    114.3
    4.500
    127
    5
    102
    4.016
    127
    5
    102
    4.016
    76
    2.99
    76
    2.99
    25
    0.99
    125
    5.5OD
    139.7
    5.500
    140
    5.5
    122
    4.803
    140
    5.5
    122
    4.803
    89
    3.504
    89
    3.504
    25
    0.99
    150
    6.5OD
    165.1
    6.500
    165
    6.5
    140
    5.511
    165
    6.5
    140
    5.511
    102
    4.016
    102
    4.016
    25
    0.99
    150
    6
    168.3
    6.625
    165
    6.5
    140
    5.511
    165
    6.5
    140
    5.511
    102
    4.016
    102
    4.016
    25
    0.99
    200
    8
    219.1
    8.625
    197
    7.75
    175
    6.89
    197
    7.75
    175
    6.89
    127
    5
    127
    5
    30
    1.181

     

    3.Surface treatment: red painted, orange painted, galvanized, red spraied, orange spraied, dacromet, epoxy powder, epoxy, electroplate, galvanized+epoxy, etc.

    4.Applications: Industrial pipeline system on shipping ,mine, fire protection ,oil field,textile,powder plant,etc.

Frequently Asked Questions


How to prevent the coating of cast iron exhaust products

If the gas is not vented from the metal before the powder coating, problems such as bumps, bubbles, and pinholes may occur. In the world of powder coatings, cast metal surfaces such as iron, steel, and aluminum are not always tolerable. These metals trap gas pockets of gases, air and other contaminants in the metal during the casting process. Before powder coating, the workshop must remove these gases and impurities from the metal. The process of releasing entrained gas or pollutants is called degassing. If the store is not properly degassed, then problems such as bumps, bubbles, and pinholes will result in loss of adhesion between coatings and rework. Degassing occurs when the substrate is heated, which causes the metal to expand and expel trapped gases and other impurities. It must be noted that during the curing process of powder coatings, residual gases or contaminants in the substrate will also be released. In addition, gas is released during the process of casting the substrate (sand casting or die casting). In addition, some products (such as OGF additives) can be dry blended with powder coatings to help solve this phenomenon. For cast metal powder spraying, these steps can be tricky and take some extra time. However, this extra time is only a small part of the time required to rework and restart the entire process. Although this is not a foolproof solution, using it with specially formulated primers and topcoats can help alleviate outgassing problems. 2021 will appear before you know it. It will mark the beginning of a new decade and bring changes to the world in the way we know it. For more than 50 years, fluidized beds have been used to coat parts with powder coatings. In this article, two industry experts solved some common problems related to fluidized bed process...

EN124 cast iron gratings supplier

our factory is a professional manufacture and export of many kinds of casting iron parts for more than ten years.

Machining Parts and Lathe Parts

We have deep business interaction with manufactures in major cities of China, so we are quite flexible

The global ferrous metal casting market research report from 2021 to 2028 will cover detailed global trend analysis and professional technology industry vision

The "Ferrous Metal Casting Market" report added by IndustryAndResearch provides a comprehensive introduction to strategic recommendations, trends, segmentation, use case analysis, competitive knowledge, global and regional forecasts to 2028. The goal of this exploration is to provide a 360-degree holistic view of the black casting market and bring insights that can help stakeholders recognize opportunities and difficulties. The report provides the market size of the global black castings market by value and quantity.

Can I get some samples first?

Sure.We are appreciated that new clients pay for the courier cost for free samples

Get Free Product Quotes

Fill in your phone and email information, and we will contact you promptly within one business day to resolve the issue you raised as soon as possible.

Related Products

We have deep business interaction with manufactures in major cities of China, so we are quite flexible and confident to be any kind of casting products to be able to meet our customers’request on quanlity and delivery time.